Details

---

BUY SN74LVC1G58DBVRE4 https://www.utsource.net/itm/p/12610285.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	1.65		5.5	V	Operating supply voltage range
Input Voltage (High Level)	VIH	0.7*VCC		VCC	V	Minimum input voltage for logic high
Input Voltage (Low Level)	VIL	0		0.3*VCC	V	Maximum input voltage for logic low
Output Voltage (High Level)	VOH		0.9*VCC	VCC	V	Minimum output voltage for logic high
Output Voltage (Low Level)	VOL	0		0.1*VCC	V	Maximum output voltage for logic low
Propagation Delay Time	tpd		4.8	7.5	ns	Propagation delay time at VCC = 4.5V, TA = 25掳C
Power Consumption	ICC		1		渭A	Supply current at no load
Input Leakage Current	IIL	-1		1	渭A	Maximum leakage current into input pin
Output Leakage Current	IOL	-1		1	渭A	Maximum leakage current out of output pin

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the specified range (1.65V to 5.5V).
2. Input Signals: Apply input signals that comply with the defined input voltage levels for proper logic recognition.
3. Output Load: Connect appropriate loads to the output pins ensuring the output current does not exceed the maximum ratings.
4. Operating Temperature: The device is designed to operate within a temperature range of -40掳C to +85掳C.
5. Decoupling Capacitors: Place decoupling capacitors close to the power supply pins to minimize noise and transient effects.
6. Propagation Delay: Account for the propagation delay in timing calculations for synchronous designs.
7. Handling Precautions: Handle the device with care to avoid damage from electrostatic discharge (ESD).

(For reference only)