Details

---

BUY AP1501-50. https://www.utsource.net/itm/p/12610294.html

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	VIN	2.7	-	5.5	V
Output Voltage	VOUT	-	5.0	-	V
Output Current	IOUT	-	500	-	mA
Quiescent Current	IQ	-	1.0	-	渭A
Dropout Voltage	VDROPOUT	-	300	-	mV
Load Regulation	-	-	0.5	-	%
Line Regulation	-	-	0.1	-	%
Ripple Rejection	-	-	60	-	dB
Operating Temperature	TOPR	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for Use:

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 2.7V to 5.5V.
   • Avoid exceeding the maximum input voltage to prevent damage to the device.

2. Output Voltage (VOUT):

   • The output voltage is fixed at 5.0V. No external components are required to set this voltage.

3. Output Current (IOUT):

   • The device can provide up to 500mA of output current. Ensure the load does not exceed this limit to avoid overheating or damage.

4. Quiescent Current (IQ):

   • The quiescent current is very low, typically around 1.0渭A, making it suitable for battery-powered applications.

5. Dropout Voltage (VDROPOUT):

   • The dropout voltage is approximately 300mV. This means the input voltage should be at least 300mV higher than the output voltage to maintain regulation.

6. Load Regulation:

   • The load regulation is 0.5%, indicating that the output voltage will remain stable even when the load changes.

7. Line Regulation:

   • The line regulation is 0.1%, ensuring that the output voltage remains stable despite variations in the input voltage.

8. Ripple Rejection:

   • The device provides 60dB of ripple rejection, effectively filtering out input voltage noise.

9. Operating Temperature (TOPR):

   • The device can operate within a temperature range of -40掳C to 85掳C. Ensure the ambient temperature does not exceed these limits.

10. Storage Temperature (TSTG):

    • The device can be stored at temperatures ranging from -65掳C to 150掳C.

11. Mounting and Handling:

    • Handle the device with care to avoid static damage.
    • Follow standard surface mount technology (SMT) procedures for mounting the device on a PCB.

12. Thermal Considerations:

    • Ensure adequate heat dissipation if the device is operating near its maximum output current, especially in high ambient temperatures.

13. Capacitors:

    • Use appropriate input and output capacitors to ensure stability and filter out noise. Typically, a 1渭F ceramic capacitor is recommended for both input and output.

14. PCB Layout:

    • Place the input and output capacitors as close as possible to the device to minimize inductance and improve performance.

By following these guidelines, you can ensure optimal performance and reliability of the AP1501-50.

(For reference only)