Details

---

BUY DS26C32AMJ/883 https://www.utsource.net/itm/p/12610297.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7		5.5	V
Output Current	IO	Per Output		10		mA
Operating Temperature	Toper		-40		85	掳C
Storage Temperature	Tstg		-65		150	掳C
Input Leakage Current	IIH	VI = VCC	-1		1	渭A
	IIL	VI = 0V	-1		1	渭A
Propagation Delay Time	tPLH	VIL to VOH		9		ns
	tPHL	VIH to VOL		9		ns
Power Dissipation	PD	All Outputs High			340	mW

Instructions for DS26C32AMJ/883

1. Power Supply Requirements:

   • Ensure the supply voltage (VCC) is within the range of 2.7V to 5.5V for proper operation.

2. Operating Temperature:

   • The device operates reliably between -40掳C and +85掳C. Store the device between -65掳C and +150掳C.

3. Input Handling:

   • Keep input leakage current within 卤1渭A to prevent potential damage or malfunction.
   • Apply input voltages within the specified limits relative to VCC and ground.

4. Propagation Delay:

   • Expect a typical propagation delay of 9ns for both low-to-high and high-to-low transitions.

5. Power Dissipation:

   • Be mindful of power dissipation, especially when all outputs are driven high; it should not exceed 340mW.

6. Output Current:

   • Each output can source up to 10mA. Design your circuit to ensure this limit is not exceeded to avoid damaging the device.

7. Handling Precautions:

   • Use appropriate ESD protection measures during handling and installation.
   • Follow standard PCB layout guidelines to minimize noise and interference.

8. Mounting:

   • Ensure proper mounting on the PCB with adequate thermal management if operating near maximum temperature or power conditions.

Note: Always refer to the latest datasheet from the manufacturer for the most accurate and detailed information.

(For reference only)