Details

---

BUY FX20KMJ-06. https://www.utsource.net/itm/p/12610300.html

Parameter	Description	Value
Part Number	Full part number	FX20KMJ-06
Type	Relay
Function	SPDT (Single Pole Double Throw)
Coil Voltage	Nominal coil voltage	24V DC
Coil Power	Power consumption of the coil	1.2W
Coil Resistance	Resistance of the coil	200惟
Contact Form	Configuration of contacts	SPDT
Contact Rating	Maximum current and voltage that the contacts can handle	10A, 250V AC
Insulation Voltage	Dielectric strength between contacts and coil	1000V AC
Operating Temperature	Range of temperatures where the relay can operate effectively	-40掳C to 85掳C
Mechanical Life	Number of operations before mechanical failure	10 million cycles
Electrical Life	Number of operations before electrical failure under rated load	100,000 cycles
Dimensions	Physical size of the relay	17.5mm x 12.5mm x 12.5mm
Weight	Weight of the relay	3.5g
Mounting	Method of mounting the relay	Surface mount
Terminal Type	Type of terminals for connections	Solder tabs
Certifications	Compliance with standards and regulations	UL, CE, RoHS

Instructions for Use

1. Installation:

   • Ensure the relay is installed in a clean, dry environment.
   • Mount the relay on a PCB or other suitable surface using the provided solder tabs.
   • Ensure proper orientation and alignment during installation.

2. Wiring:

   • Connect the coil terminals to the control circuit using the appropriate voltage (24V DC).
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit as required.

3. Operation:

   • When the coil is energized, the contact will switch from the NC position to the NO position.
   • When the coil is de-energized, the contact will return to the NC position.
   • Ensure the load current does not exceed the contact rating to avoid damage.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a soft, dry cloth if necessary.
   • Do not use solvents or abrasive materials as they may damage the relay.

5. Storage:

   • Store the relay in a dry, cool place away from direct sunlight and corrosive substances.
   • Avoid exposure to extreme temperatures and humidity to prevent degradation.

6. Disposal:

   • Dispose of the relay in accordance with local environmental regulations.
   • Recycle components when possible to reduce waste.

(For reference only)