Details

---

BUY MAX135CWI https://www.utsource.net/itm/p/12610342.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7		5.5	V
Input Voltage Range	VIN	Differential	-0.3		2.4	V
Output Voltage Swing	VOUT	High Level (VCC = 5V)		3.6	5.0	V
	VOUT	Low Level (VCC = 5V)	0		1.4	V
Input Bias Current	IIN		-1		1	渭A
Power Dissipation	PD	Per Channel (VCC = 5V)		90		mW
Operating Temperature	Toper	Commercial	0		70	掳C
	Toper	Industrial	-40		85	掳C

Instructions for MAX135CWI:

1. Power Supply Connection:

   • Connect the VCC pin to a power supply within the range of 2.7V to 5.5V.
   • Ensure that the GND pin is connected to the system ground.

2. Signal Input:

   • Apply differential input signals within the range of -0.3V to +2.4V.
   • Ensure input bias currents are kept within 卤1渭A to avoid distortion.

3. Output Configuration:

   • For optimal performance, load resistances should be chosen based on the output voltage swing requirements.
   • The output can swing from approximately 3.6V to 5.0V at high level and from 0V to 1.4V at low level when VCC is 5V.

4. Thermal Considerations:

   • Monitor the operating temperature to ensure it stays within the specified range (-40掳C to 85掳C for industrial use, 0掳C to 70掳C for commercial use).
   • Provide adequate heat sinking if operating near maximum power dissipation levels.

5. Installation:

   • Place the device in a location with sufficient airflow or cooling mechanisms if necessary.
   • Follow standard ESD precautions during handling and installation.

6. Testing:

   • After installation, test the device under typical operating conditions to ensure proper functionality.
   • Verify signal integrity and power consumption to meet design specifications.

(For reference only)