Details

---

BUY D8085AHC-2 https://www.utsource.net/itm/p/12610345.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	Vcc	4.5	5	5.5	V
Output Current (High)	Ioh	-1	-2	-4	mA
Output Current (Low)	Iol	1	2	4	mA
Input Current (High)	IIH	0.01	0.02	0.04	mA
Input Current (Low)	IIL	-0.01	-0.02	-0.04	mA
Propagation Delay Time	tpd	6	10	14	ns
Power Dissipation	PD	-	100	-	mW
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for Using D8085AHC-2

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V.
   • Connect the Vcc pin to the positive terminal of your power supply and the GND pin to the ground.

2. Input Signals:

   • The input current should be within the specified range (IIH: 0.01mA to 0.04mA, IIL: -0.01mA to -0.04mA).
   • Apply logic high (Vcc) or low (GND) signals to the input pins as required.

3. Output Signals:

   • The output current when high (Ioh) should not exceed -4mA, and when low (Iol) should not exceed 4mA.
   • Connect the load or next stage circuitry to the output pins accordingly.

4. Propagation Delay:

   • The propagation delay time (tpd) is the time it takes for the output to change state after the input changes. It ranges from 6ns to 14ns.

5. Thermal Management:

   • The device can dissipate up to 100mW of power. Ensure proper heat dissipation if operating near the maximum power dissipation.
   • The operating temperature range is from -40掳C to 85掳C. Avoid exceeding these limits to prevent damage.

6. Storage:

   • Store the device in a dry environment with temperatures between -65掳C and 150掳C to ensure long-term reliability.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Use appropriate ESD protection measures when handling the device.

By following these instructions, you can ensure optimal performance and longevity of the D8085AHC-2.

(For reference only)