Details

---

BUY 74HC76AP https://www.utsource.net/itm/p/12610362.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	2.0	-	6.0	V
Input High Voltage	VIH	3.15	-	VCC	V
Input Low Voltage	VIL	0	-	1.35	V
Output High Voltage	VOH	-	VCC - 0.1	VCC - 0.2	V
Output Low Voltage	VOL	0	0.1	0.2	V
Propagation Delay Time	tpd	-	8	18	ns
Power Consumption	Pd	-	10	-	渭W
Operating Temperature	TA	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 6.0V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Input Voltage Levels:

   • For a valid high input, the voltage should be at least 3.15V or up to the supply voltage (V_CC).
   • For a valid low input, the voltage should be between 0V and 1.35V.

3. Output Voltage Levels:

   • The output high voltage (V_OH) will be close to the supply voltage, typically V_CC - 0.1V.
   • The output low voltage (V_OL) will be close to 0V, typically 0.1V.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 8ns, with a maximum of 18ns. This is the time it takes for a change in input to affect the output.

5. Power Consumption:

   • The typical power consumption (P_d) is 10渭W. Ensure that the power supply can handle this load.

6. Temperature Range:

   • The operating temperature (T_A) should be between -40掳C and 85掳C.
   • The storage temperature (T_STG) should be between -65掳C and 150掳C.

7. Handling and Storage:

   • Store the device in a dry, cool place to avoid moisture damage.
   • Handle the device with care to avoid static discharge, which can damage the internal circuits.

8. Schematic and Layout:

   • Refer to the datasheet for the pinout and recommended PCB layout to ensure proper connections and performance.

9. Testing:

   • Before integrating the 74HC76AP into your design, test it in a simple circuit to verify its functionality.

10. Compliance:

    • Ensure that the device meets any necessary regulatory standards for your application.

For more detailed information, refer to the specific datasheet provided by the manufacturer.

(For reference only)