Details

---

BUY TPH1500CNH,L1Q https://www.utsource.net/itm/p/12610366.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5		20	V	Operating input voltage range
Continuous Drain Current	ID		15		A	Continuous drain current at 25掳C
Peak Pulse Current	IPP		60		A	Peak pulse current (10 渭s, repetition rate 2%)
RDS(on)			3.8		m惟	On-resistance at VGS = 10V
Gate Charge	Qg		17		nC	Total gate charge
Switching Time	tD		9		ns	Delay time
Switching Time	tr		9		ns	Rise time
Switching Time	tf		9		ns	Fall time
Thermal Resistance	R胃JC		1.2		掳C/W	Junction-to-case thermal resistance

Instructions for TPH1500CNH,L1Q:

1. Installation:

   • Ensure the device is soldered onto a PCB with adequate heat dissipation.
   • Verify correct orientation during installation to prevent damage.

2. Operating Conditions:

   • Operate within the specified input voltage range (4.5V to 20V).
   • Do not exceed the continuous drain current of 15A or peak pulse current of 60A to avoid overheating and potential failure.

3. Thermal Management:

   • Maintain junction temperature within safe operating limits by ensuring proper heat sinking if necessary.
   • Monitor thermal resistance to ensure efficient heat transfer from the junction to the case.

4. Switching Applications:

   • Utilize the low RDS(on) value for minimal power loss in switching applications.
   • Consider the total gate charge when designing drive circuits to optimize switching performance.

5. Handling Precautions:

   • Handle with care to prevent electrostatic discharge (ESD) damage.
   • Follow manufacturer guidelines for storage and handling to ensure reliability.

6. Testing:

   • Test the device under controlled conditions before deployment in final applications.
   • Validate switching times and other critical parameters to ensure compliance with design specifications.

(For reference only)