Details

---

BUY 67L050 https://www.utsource.net/itm/p/12610372.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	2.0	3.3	5.5	V	Operating voltage range
Standby Current	Istandby	-	1.0	-	渭A	Current consumption in standby mode
Active Current	Iactive	-	10	-	mA	Current consumption in active mode
Input Voltage Range	Vin	0	-	Vcc	V	Range of input voltages
Output Voltage Range	Vout	0	-	Vcc	V	Range of output voltages
Operating Temperature	Temp	-40	-	85	掳C	Temperature range for operation
Storage Temperature	Tstore	-55	-	125	掳C	Temperature range for storage
Output Current	Iout	-	50	100	mA	Maximum continuous output current
Power Dissipation	Pdiss	-	-	500	mW	Maximum power dissipation
Response Time	tresp	-	10	-	渭s	Time to respond to input changes

Instructions for Using 67L050

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) to the appropriate pin.
   • Ensure the supply voltage is within the specified range (2.0V to 5.5V).

2. Standby Mode:

   • To enter standby mode, set the enable pin to low (0V).
   • The device will consume approximately 1.0 渭A in this mode.

3. Active Mode:

   • To activate the device, set the enable pin to high (Vcc).
   • The device will consume up to 10 mA in active mode.

4. Input and Output Connections:

   • Connect the input signal to the designated input pin.
   • Ensure the input voltage is within the range of 0V to Vcc.
   • The output signal will be available on the designated output pin.
   • The output voltage will also be within the range of 0V to Vcc.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device within the temperature range of -55掳C to 125掳C.

6. Output Current:

   • The device can provide a maximum continuous output current of 100 mA.
   • For optimal performance, keep the output current below 50 mA.

7. Power Dissipation:

   • Ensure that the power dissipation does not exceed 500 mW to avoid overheating.

8. Response Time:

   • The device will respond to input changes within 10 渭s.

9. Handling and Installation:

   • Handle the device with care to avoid static damage.
   • Follow proper soldering techniques to ensure reliable connections.

10. Testing:

    • Test the device under typical operating conditions to verify its performance.
    • Use a multimeter to check the supply voltage, input, and output signals.

(For reference only)