Details

---

BUY CD4013 DIP14 https://www.utsource.net/itm/p/12610382.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	3		18	V	Operating supply voltage
Input High Level Voltage	VIH	2		VDD	V	Minimum input high level voltage
Input Low Level Voltage	VIL	0		0.5	V	Maximum input low level voltage
Output High Level Voltage	VOH	2.4		VDD	V	Minimum output high level voltage
Output Low Level Voltage	VOL	0		0.5	V	Maximum output low level voltage
Propagation Delay Time	tpd		60		ns	Propagation delay time
Power Dissipation	PD			100	mW	Maximum power dissipation
Operating Temperature Range	Toper	-40		85	掳C	Operating temperature range

Instructions for CD4013 DIP14

1. Power Supply Connection:

   • Connect the positive supply voltage (VDD) to pin 14.
   • Connect the ground (GND) to pin 7.

2. Input Connections:

   • Connect the data inputs (D) to pins 1 and 12.
   • Connect the clock inputs (CP) to pins 2 and 11.
   • Connect the set (S) and reset (R) inputs to pins 3 and 4, and 10 and 9 respectively.

3. Output Connections:

   • The Q outputs are available on pins 6 and 13.
   • The inverted Q outputs are available on pins 4 and 5.

4. Operating Conditions:

   • Ensure that the operating voltage is within the specified range (3V to 18V).
   • Keep the operating temperature within the specified range (-40掳C to 85掳C).

5. Handling Precautions:

   • Handle with care to avoid damage from electrostatic discharge (ESD).
   • Ensure proper heat dissipation if operating near the maximum power dissipation limit.

6. Propagation Delay:

   • Be aware of the propagation delay when designing timing-sensitive circuits.

7. Testing:

   • Before finalizing the design, test the circuit under various conditions to ensure reliability.

This table and instruction set provide a comprehensive overview for using the CD4013 DIP14 dual D-type flip-flop.

(For reference only)