Details

---

BUY L2720 https://www.utsource.net/itm/p/12610388.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	4.5	5.0	5.5	V	Operating supply voltage
Output Current	Iout	-	100	200	mA	Maximum continuous output current
Quiescent Current	Iq	0.5	1.0	1.5	mA	Current consumed by the device when no load is applied
Dropout Voltage	Vdo	0.2	0.3	0.5	V	Voltage difference between input and output at max load
Thermal Shutdown	Tsd	-	-	150	掳C	Temperature at which the device shuts down
Operating Temperature	Topr	-40	-	85	掳C	Ambient operating temperature range
Storage Temperature	Tstg	-65	-	150	掳C	Temperature range for storage

Instructions for Using the L2720:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Output Current (Iout):

   • The L2720 can provide a maximum continuous output current of 200mA. For higher currents, consider using a heatsink or a more powerful regulator.

3. Quiescent Current (Iq):

   • The quiescent current is the current consumed by the device when no load is applied. It is typically around 1.0mA.

4. Dropout Voltage (Vdo):

   • The dropout voltage is the minimum difference between the input and output voltages required to maintain regulation. It is typically 0.3V at maximum load.

5. Thermal Shutdown (Tsd):

   • The device will automatically shut down if the temperature exceeds 150掳C to prevent damage. Ensure proper heat dissipation, especially under high load conditions.

6. Operating Temperature (Topr):

   • The device is designed to operate in ambient temperatures ranging from -40掳C to 85掳C. Avoid exposing the device to temperatures outside this range.

7. Storage Temperature (Tstg):

   • Store the device in temperatures ranging from -65掳C to 150掳C to ensure long-term reliability.

8. Mounting and Layout:

   • Use a good thermal design to ensure efficient heat dissipation. Place the device close to the load and use a ground plane to improve thermal performance.

9. Input and Output Capacitors:

   • Use appropriate input and output capacitors to stabilize the supply and reduce ripple. Typical values are 10渭F for the input and 10渭F for the output.

10. Polarity:

    • Ensure correct polarity when connecting the device. Reversing the polarity can damage the L2720.

11. Transient Protection:

    • Consider adding transient protection components like TVS diodes to protect against voltage spikes and surges.

By following these guidelines, you can ensure reliable operation of the L2720 in your application.

(For reference only)