Details

---

BUY A69254 https://www.utsource.net/itm/p/12610391.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	Vcc	2.7	-	5.5	V	Operating supply voltage range
Output Current	Iout	-	300	-	mA	Continuous output current
Quiescent Current	Iq	-	1.2	-	mA	Current consumption in active mode
Shutdown Current	Isd	-	0.1	-	渭A	Current consumption in shutdown mode
Efficiency	畏	-	90	-	%	Typical efficiency at full load
Operating Temperature	Topr	-40	-	85	掳C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	掳C	Storage temperature range
Thermal Resistance	Rth	-	50	-	掳C/W	Junction-to-ambient thermal resistance

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 2.7V to 5.5V.
   • Use appropriate decoupling capacitors (typically 10渭F and 0.1渭F) close to the power pins to stabilize the supply.

2. Output Configuration:

   • The A69254 can provide up to 300mA of continuous output current.
   • Ensure the load is properly matched to avoid overcurrent conditions which can damage the device.

3. Thermal Management:

   • The device has a typical thermal resistance (Rth) of 50掳C/W. Ensure adequate heat dissipation, especially under high load conditions.
   • Do not exceed the maximum operating temperature of 85掳C or the storage temperature of 150掳C.

4. Shutdown Mode:

   • To enter shutdown mode, pull the shutdown pin (SD) low. The device will consume only 0.1渭A in this mode.
   • To resume operation, pull the SD pin high.

5. Efficiency:

   • The device is designed to achieve up to 90% efficiency at full load. Monitor the efficiency to ensure optimal performance.

6. Operating Environment:

   • The device can operate in temperatures ranging from -40掳C to 85掳C. Ensure the ambient temperature does not exceed these limits.
   • Store the device in a dry environment with temperatures between -65掳C and 150掳C.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling and installing the device.

8. Mounting:

   • Ensure proper soldering techniques are used to avoid thermal and mechanical stress on the device.
   • Use a well-ventilated area for soldering to dissipate any harmful fumes.

(For reference only)