Details

---

BUY MOC5009 https://www.utsource.net/itm/p/12610396.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 20 mA		1.2	1.5	V
Peak Reverse Voltage	VR			700		V
Forward Current	IF	Continuous		20	30	mA
Trigger Current	IFT			5	15	mA
Zero Cross Sensitivity	VZC			15	45	V
Output Turn-On Time	ton	IF = 20 mA, RL=1kΩ		2	6	μs
Output Turn-Off Time	toff	IF = 20 mA, RL=1kΩ		2	6	μs
Isolation Voltage	VISOL	1 minute		4000		Vrms

Instructions for Use:

1. Mounting and Handling:

   • Handle the MOC5009 with care to avoid damaging the leads or the body of the device.
   • Ensure proper mounting on the PCB to maintain isolation integrity.

2. Power Supply:

   • Ensure the supply voltage does not exceed the peak reverse voltage (VR) rating to prevent damage.

3. Current Limiting:

   • Use appropriate current-limiting resistors to ensure the forward current (IF) does not exceed the maximum rating.

4. Zero Cross Detection:

   • For applications requiring zero-cross detection, ensure the input voltage meets the zero cross sensitivity (VZC) requirements.

5. Thermal Considerations:

   • Provide adequate heat dissipation if operating near the maximum forward current limits.

6. Electrical Isolation:

   • Verify that the isolation voltage (VISOL) is sufficient for your application’s safety requirements.

7. Testing:

   • When testing, apply voltages and currents within specified limits to avoid premature failure or inaccurate readings.

8. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of electromagnetic interference.

(For reference only)