Details

---

BUY EEHZC1H330XP https://www.utsource.net/itm/p/12610412.html

Parameter	Symbol	Value	Unit
Capacitance	C	330	pF
Tolerance		±5%
Voltage Rating (DC)	VDC	500	V
Temperature Coefficient	α	-2000	ppm/°C
Operating Temperature	Top	-55 to +85	°C
Insulation Resistance	RI	1000	MΩ
Dissipation Factor	tan δ	≤ 0.5%
Lead Spacing		5.0	mm
Lead Length		19.0	mm

Instructions for Use:

1. Mounting:

   • Ensure that the leads are not bent sharply close to the body of the capacitor.
   • Use a soldering iron with a temperature setting no higher than 350°C.
   • Soldering time should not exceed 3 seconds.

2. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Avoid exposure to high humidity and temperatures above 40°C.

3. Handling:

   • Handle with care to avoid mechanical damage.
   • Do not apply excessive force when inserting or removing the component from the circuit board.

4. Electrical Considerations:

   • Ensure that the applied voltage does not exceed the rated voltage.
   • The capacitor is designed for DC applications; do not use in AC circuits without proper derating.

5. Marking:

   • The capacitance value and tolerance are marked on the component body. Refer to the datasheet for specific marking codes if necessary.

6. Testing:

   • Before installation, test the capacitor using a capacitance meter to ensure it meets the specified parameters.
   • Check for any short circuits or open circuits before final assembly.

7. Disposal:

   • Dispose of the capacitor according to local environmental regulations. Do not incinerate.

(For reference only)