Details

---

BUY 2SC3164 https://www.utsource.net/itm/p/12610426.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCE	-	-	80	V
Collector-Base Voltage	VCB	-	-	80	V
Emitter-Base Voltage	VEB	-	-	5	V
Collector Current	IC	-	1.5	3	A
Base Current	IB	-	0.15	0.3	A
DC Current Gain	hFE	20	100	400	-
Transition Frequency	fT	-	200	-	MHz
Power Dissipation	PT	-	-	65	W
Junction Temperature	TJ	-20	-	150	掳C
Storage Temperature Range	TSTG	-55	-	150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SC3164 with care to avoid mechanical stress on the leads.
   • Ensure proper heat sinking when operating at high power levels to maintain junction temperature within specified limits.

2. Biasing:

   • Apply appropriate biasing to ensure the transistor operates in the desired region (cut-off, active, or saturation).
   • Use a base resistor to limit base current and prevent damage.

3. Voltage and Current Ratings:

   • Do not exceed the maximum ratings for collector-emitter voltage, collector-base voltage, and emitter-base voltage.
   • Ensure the collector current does not exceed the maximum value to prevent overheating and potential damage.

4. Thermal Management:

   • Monitor the junction temperature to ensure it remains within the operational range.
   • Use thermal compounds and heatsinks to improve heat dissipation if necessary.

5. Storage:

   • Store the 2SC3164 in a dry, cool place to prevent moisture damage.
   • Avoid exposing the device to extreme temperatures outside the storage temperature range.

6. Testing:

   • Use a multimeter or transistor tester to verify the functionality of the 2SC3164 before installation.
   • Check for continuity and correct polarity to avoid incorrect connections.

7. Soldering:

   • Use a low-wattage soldering iron to avoid thermal shock.
   • Ensure the solder joints are clean and free from cold solder joints or bridges.

(For reference only)