Details

---

BUY BD232 https://www.utsource.net/itm/p/12610435.html

Parameter	Symbol	Value	Unit
Supply Voltage	Vcc	4.5 to 20	V
Output Current	Iout	1.5	A
Quiescent Current	Iq	5	mA
Dropout Voltage	Vdo	1.8	V
Operating Temp.	Tj	-40 to +125	掳C
Storage Temp.	Tstg	-65 to +150	掳C
Output Voltage	Vout	5, 12, 15	V

Instructions for BD232:

1. Supply Voltage (Vcc):

   • Ensure the input voltage is within the range of 4.5V to 20V. Exceeding this range can damage the device.

2. Output Current (Iout):

   • The maximum output current is 1.5A. Do not exceed this limit to avoid overheating and potential failure.

3. Quiescent Current (Iq):

   • The quiescent current is 5mA. This is the current consumed by the regulator when no load is connected.

4. Dropout Voltage (Vdo):

   • The dropout voltage is 1.8V. This means the input voltage must be at least 1.8V higher than the output voltage to maintain regulation.

5. Operating Temperature (Tj):

   • The operating temperature range is from -40掳C to +125掳C. Ensure the device operates within this range to prevent thermal stress.

6. Storage Temperature (Tstg):

   • The storage temperature range is from -65掳C to +150掳C. Store the device in a suitable environment to avoid damage.

7. Output Voltage (Vout):

   • The output voltage options are 5V, 12V, and 15V. Select the appropriate version based on your application requirements.

8. Installation:

   • Mount the BD232 on a heatsink if it will be operating at high currents or in high ambient temperatures to ensure proper heat dissipation.
   • Use appropriate decoupling capacitors (typically 0.1渭F and 10渭F) close to the input and output terminals to stabilize the regulator and filter out noise.

9. Handling:

   • Handle the BD232 with care to avoid static discharge, which can damage the internal components.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

10. Testing:

    • Before connecting the BD232 to your circuit, test it with a simple load to ensure it is functioning correctly.
    • Monitor the temperature and output voltage to ensure the regulator is operating within its specified parameters.

(For reference only)