Details

---

BUY 24NM65N. https://www.utsource.net/itm/p/12610471.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Drain-Source Voltage	VDS	-	-	650	V
Gate-Source Voltage	VGS	-10	-	20	V
Continuous Drain Current	ID	-	24	-	A	@ Tc = 25掳C
Pulse Drain Current	Ipp	-	96	-	A	tp = 10 渭s, Tc = 25掳C
Power Dissipation	PD	-	-	270	W	@ Tc = 25掳C
Junction Temperature	TJ	-55	-	175	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Thermal Resistance	R胃JC	-	0.75	-	掳C/W	Case to Junction
Total Gate Charge	Qg	-	135	-	nC	@ VGS = 15V, IDS = 24A
Input Capacitance	Ciss	-	2800	-	pF	@ VDS = 650V, VGS = 0V
Output Capacitance	Coss	-	1300	-	pF	@ VDS = 650V, VGS = 0V
Reverse Transfer Capacitance	Crss	-	600	-	pF	@ VDS = 650V, VGS = 0V

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to maintain the junction temperature within the specified limits.
   • Handle the device with care to avoid mechanical stress and static discharge.

2. Electrical Connections:

   • Connect the drain (D) to the high-voltage side of the circuit.
   • Connect the source (S) to the low-voltage side or ground.
   • Apply the gate (G) voltage relative to the source (S) to control the device.

3. Gate Drive:

   • Use a gate driver capable of providing the necessary current to charge and discharge the gate capacitance quickly.
   • Ensure the gate voltage is within the specified range to prevent damage to the device.

4. Thermal Management:

   • Monitor the junction temperature and use appropriate cooling methods (e.g., heatsinks, fans) to keep it within safe limits.
   • Consider derating the power dissipation if operating at higher ambient temperatures.

5. Overcurrent Protection:

   • Implement overcurrent protection to prevent damage from excessive current.
   • Use fast-acting fuses or current-limiting circuits.

6. Storage and Transportation:

   • Store the device in a dry, cool environment away from direct sunlight.
   • Follow ESD (Electrostatic Discharge) precautions during handling and transportation.

7. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use appropriate test equipment and follow safety guidelines to avoid damage to the device or injury.

8. Compliance:

   • Ensure that the device is used in compliance with all relevant safety and regulatory standards.

(For reference only)