Details

---

BUY CBT3384C https://www.utsource.net/itm/p/12610475.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5	5.0	5.5	V
Output Current	Iout	Continuous	-	150	-	mA
Power Dissipation	Pd	Maximum	-	-	625	mW
Operating Temperature	Topr	-	-40	25	85	掳C
Storage Temperature	Tstg	-	-65	-	150	掳C
Input Capacitance	Cin	-	-	4	-	pF
Output Capacitance	Cout	-	-	20	-	pF
Quiescent Current	Iq	-	-	1	-	mA
Shutdown Current	Isd	-	-	0.1	-	渭A

Instructions for Using CBT3384C:

1. Supply Voltage:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Output Current:

   • The maximum continuous output current (Iout) is 150mA. Exceeding this value can lead to overheating and potential failure.

3. Power Dissipation:

   • The maximum power dissipation (Pd) is 625mW. Ensure adequate heat sinking if operating near this limit to prevent thermal shutdown.

4. Operating Temperature:

   • The device is designed to operate within a temperature range of -40掳C to 85掳C. Avoid exposing the device to temperatures outside this range.

5. Storage Temperature:

   • Store the device in an environment with a temperature between -65掳C and 150掳C to ensure long-term reliability.

6. Input Capacitance:

   • The input capacitance (Cin) is typically 4pF. Use appropriate bypass capacitors to stabilize the input voltage.

7. Output Capacitance:

   • The output capacitance (Cout) is typically 20pF. Use appropriate bypass capacitors to stabilize the output voltage.

8. Quiescent Current:

   • The quiescent current (Iq) is typically 1mA. This is the current consumed by the device when it is active but not driving any load.

9. Shutdown Current:

   • The shutdown current (Isd) is typically 0.1渭A. Use the shutdown feature to minimize power consumption when the device is not in use.

Additional Notes:

• Always refer to the datasheet for detailed specifications and application notes.
• Proper PCB layout and component selection are crucial for optimal performance and reliability.
• Ensure all connections are secure and free from shorts or open circuits.

(For reference only)