Details

---

BUY NCP1012ST100T3G https://www.utsource.net/itm/p/12610497.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating	2.7	-	5.5	V
Output Voltage	VOUT	Fixed	-	3.3	-	V
Quiescent Current	IQ	VIN = 5V, IOUT = 0mA	-	45	-	μA
Dropout Voltage	VDROPOUT	IOUT = 100mA	-	200	-	mV
Load Regulation	ΔVOUT	IOUT: 0mA to 100mA	-	2	-	%
Line Regulation	ΔVOUT	VIN: 2.7V to 5.5V	-	0.1	-	%
PSRR (Power Supply Rejection Ratio)	PSRR	f = 120Hz	-	65	-	dB
Transient Response	ΔVOUT	Step Load 0mA to 100mA	-	50	-	mV

Instructions for NCP1012ST100T3G

1. Input Capacitor Selection:

   • A 1μF ceramic capacitor is recommended for stable operation.
   • Place the input capacitor as close as possible to the device.

2. Output Capacitor Selection:

   • Use a minimum of 1μF ceramic capacitor for output stability.
   • Higher values can be used for better transient response.

3. PCB Layout Considerations:

   • Keep the ground connections short and direct.
   • Ensure good thermal management by providing adequate copper area or heatsink if necessary.

4. Operating Temperature Range:

   • The device is specified to operate from -40°C to +85°C ambient temperature.

5. Storage and Handling:

   • Store in original packaging until ready for use.
   • Follow proper ESD handling procedures to avoid damage.

6. Application Notes:

   • For detailed application notes and more specific design considerations, refer to the manufacturer’s datasheet available on their official website.

(For reference only)