Details

---

BUY TL082AC https://www.utsource.net/itm/p/12610537.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage Range	VCC	±5V to ±18V	-			V
Input Offset Voltage	VIO	VI+=VI-=0V, TA=25°C	2	6	10	mV
Input Bias Current	IB	VI+=VI-=0V, TA=25°C	45	80	120	nA
Input Offset Current	IOS	VI+=VI-=0V, TA=25°C	5	15	30	nA
Input Voltage Noise Density	en	f=1kHz		18		nV/√Hz
Slew Rate	SR	VO=±10V		13		V/μs
Large Signal Voltage Gain	AV	VO=±10V		4		MV/V
Output Short-Circuit Current	ISC	VCC=±15V	-		25	mA

Instructions for Using TL082AC

1. Supply Voltage: Ensure the supply voltage is within the specified range of ±5V to ±18V to avoid damage to the device.

2. Input Signals: Keep input signals within the common-mode input voltage range to prevent distortion and ensure proper operation.

3. Biasing and Offsets: Account for input bias current and offset voltage in your circuit design to minimize errors.

4. Noise Consideration: Be aware of the input voltage noise density when designing circuits that require low noise performance.

5. Slew Rate Limitations: Design your application considering the slew rate limitation to avoid signal distortion at high frequencies.

6. Gain Settings: Utilize the large signal voltage gain appropriately in your amplifier design.

7. Output Protection: Do not exceed the output short-circuit current limit to protect the operational amplifier from potential damage.

8. Operating Temperature: Ensure the ambient temperature is within the specified operating range for reliable performance.

9. Installation and Handling: Handle with care to avoid electrostatic discharge (ESD) damage and ensure correct pin orientation during installation.

(For reference only)