Details

---

BUY STRA6059H https://www.utsource.net/itm/p/12610545.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Continuous	9	-	75	V
Output Voltage	VOUT	Adjustable	0.8	-	60	V
Output Current	IOUT	Continuous	-	5	10	A
Switching Frequency	fSW	Default setting	-	200	500	kHz
Efficiency	畏	VOUT = 12V, IOUT = 5A	-	92	-	%
Quiescent Current	IQ	VIN = 24V	-	3	-	mA
Load Regulation	未L	0% to 100% load	-	0.1	-	%
Line Regulation	未VIN	VIN from 9V to 75V	-	0.1	-	%

Instructions for STRA6059H

1. Input Connection:

   • Connect the input voltage (VIN) within the range of 9V to 75V.
   • Ensure a stable and noise-free power supply to avoid malfunction.

2. Output Configuration:

   • Adjust the output voltage (VOUT) as required between 0.8V and 60V using the external resistor network.
   • Verify the output current does not exceed 10A continuously.

3. Switching Frequency Setting:

   • Set the switching frequency via an external resistor if modifying from the default range of 200kHz to 500kHz is necessary.

4. Efficiency Optimization:

   • For optimal efficiency, operate the device at around 92% efficiency when VOUT = 12V and IOUT = 5A.

5. Quiescent Current Management:

   • Monitor the quiescent current which should be around 3mA at VIN = 24V to ensure minimal power loss during operation.

6. Regulation Monitoring:

   • Check load regulation and line regulation, both typically around 0.1%, to ensure stable output under varying conditions.

7. Safety Considerations:

   • Always use appropriate heatsinking or cooling methods to prevent overheating.
   • Ensure proper insulation and grounding to protect against electrical hazards.

(For reference only)