Details

---

BUY D78312ACW-659 https://www.utsource.net/itm/p/12610559.html

Parameter	Description	Value
Part Number	Component Identifier	D78312ACW-659
Type	Device Type	DC-DC Converter
Input Voltage Range	Range of Input Voltage	4.5V to 18V
Output Voltage	Fixed Output Voltage	3.3V
Output Current	Maximum Continuous Output Current	2A
Efficiency	Typical Efficiency at Full Load	90%
Operating Temperature	Ambient Operating Temperature Range	-40掳C to +85掳C
Storage Temperature	Storage Temperature Range	-65掳C to +150掳C
Package	Physical Package	SMD, TO-263 (D2PAK)
Pin Configuration	Pin Layout	5-Pin
Protection Features	Overcurrent, Overvoltage, Thermal Shutdown	Yes
Mounting	Mounting Method	Surface Mount
Compliance	Regulatory Compliance	RoHS, REACH

Instructions for Use:

1. Power Supply Connection:

   • Connect the input voltage to the VIN pin.
   • Ensure the input voltage is within the specified range (4.5V to 18V).

2. Ground Connection:

   • Connect the GND pin to the system ground.

3. Output Connection:

   • Connect the VOUT pin to the load or circuit requiring the 3.3V output.

4. Heat Dissipation:

   • Ensure adequate heat dissipation, especially when operating at high output currents.
   • Consider using a heatsink if the device is expected to operate near its maximum output current.

5. Capacitors:

   • Place input and output capacitors close to the device to minimize noise and improve stability.
   • Recommended values: 10渭F ceramic capacitor on the input side and 10渭F ceramic capacitor on the output side.

6. Layout Considerations:

   • Keep the PCB traces short and wide to reduce resistance and inductance.
   • Avoid routing sensitive analog signals near the power traces to prevent interference.

7. Testing:

   • Before finalizing the design, test the converter under various load conditions to ensure stable operation.
   • Verify the output voltage and current ratings meet the system requirements.

8. Storage:

   • Store the device in a dry, cool environment to prevent damage.
   • Follow ESD (Electrostatic Discharge) precautions during handling and installation.

9. Compliance:

   • Ensure the device complies with all relevant safety and environmental regulations before deployment.

(For reference only)