Details

---

BUY M5227P https://www.utsource.net/itm/p/12610562.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (Vcc)	Operating supply voltage range	4.75	-	5.25	V
Operating Temperature	Temperature range for operation	-40	-	85	掳C
Storage Temperature	Temperature range for storage	-65	-	150	掳C
Input Voltage (VIH)	High-level input voltage	2.0	-	5.25	V
Input Voltage (VIL)	Low-level input voltage	0	-	0.8	V
Output Voltage (VOH)	High-level output voltage	2.4	-	5.0	V
Output Voltage (VOL)	Low-level output voltage	0	-	0.4	V
Input Current (IIH)	High-level input current	-	-	1.0	渭A
Input Current (IIL)	Low-level input current	-	-	1.0	渭A
Output Current (IOH)	High-level output current	-	-	-20	mA
Output Current (IOL)	Low-level output current	-	-	20	mA
Propagation Delay Time (tPLH)	Propagation delay time, low to high	-	15	35	ns
Propagation Delay Time (tPHL)	Propagation delay time, high to low	-	15	35	ns
Power Consumption	Typical power consumption at Vcc = 5V	-	50	-	mW

Instructions for Using M5227P

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.75V to 5.25V.
   • Connect the Vcc pin to the positive terminal of the power supply and the GND pin to the ground.

2. Input Signals:

   • Apply high-level input signals (VIH) within the range of 2.0V to 5.25V.
   • Apply low-level input signals (VIL) within the range of 0V to 0.8V.
   • Ensure the input currents (IIH and IIL) do not exceed 1.0渭A.

3. Output Signals:

   • The high-level output voltage (VOH) should be within 2.4V to 5.0V.
   • The low-level output voltage (VOL) should be within 0V to 0.4V.
   • The output currents (IOH and IOL) should not exceed -20mA and 20mA, respectively.

4. Propagation Delay:

   • The propagation delay times (tPLH and tPHL) are typically 15ns with a maximum of 35ns.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device within the temperature range of -65掳C to 150掳C.

6. Power Consumption:

   • The typical power consumption at Vcc = 5V is 50mW.

7. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place within the specified storage temperature range.

8. Testing and Troubleshooting:

   • Verify the supply voltage and signal levels using a multimeter or oscilloscope.
   • Check for any short circuits or open connections.
   • Refer to the datasheet for more detailed testing procedures and troubleshooting tips.

(For reference only)