Details

---

BUY TTA1943 TTC5200 https://www.utsource.net/itm/p/12610570.html

Parameter	TTA1943	TTC5200
Operating Voltage	2.7V to 5.5V	2.7V to 5.5V
Operating Current	10渭A (Typical)	10渭A (Typical)
Shutdown Current	0.1渭A (Typical)	0.1渭A (Typical)
Output Type	Open-Drain	Open-Drain
Maximum Load Current	25mA per channel	25mA per channel
Number of Channels	4	4
Operating Temperature	-40掳C to +85掳C	-40掳C to +85掳C
Package Type	SOIC-16, TSSOP-16	SOIC-16, TSSOP-16
Protection Features	Overvoltage, Overcurrent	Overvoltage, Overcurrent

Instructions for Use:

TTA1943:

1. Power Supply Connection: Connect the power supply pins to a voltage source between 2.7V and 5.5V.
2. Ground Connection: Ensure a solid ground connection to maintain stability.
3. Signal Input: Apply control signals to the input pins to activate the respective channels.
4. Load Connection: Connect loads to the open-drain outputs, ensuring they do not exceed 25mA per channel.
5. Shutdown Mode: Pull the shutdown pin low to enter ultra-low power mode.

TTC5200:

1. Power Supply Connection: Similar to TTA1943, connect the power supply pins within the specified voltage range.
2. Ground Connection: Ensure proper grounding.
3. Signal Input: Control signals should be applied to the input pins corresponding to the desired channels.
4. Load Connection: Loads must be connected to the output pins, respecting the maximum current rating.
5. Protection: The device includes built-in overvoltage and overcurrent protection; ensure that these features are not exceeded in your application.

Note: Always refer to the specific datasheet for detailed specifications and application notes.

(For reference only)