Details

---

BUY STC08IE150HV https://www.utsource.net/itm/p/12610587.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VCC	4.5	-	5.5	V	-
Operating Temperature	TOP	-40	-	125	°C	-
Storage Temperature	TSTG	-65	-	150	°C	-
Maximum Output Current per Channel	IO	-	1.5	-	A	Continuous, VCC = 5V
Peak Output Current per Channel	IOPK	-	3	-	A	Pulse Width ≤ 1ms, Duty Cycle ≤ 2%
Thermal Resistance (Junction to Ambient)	RθJA	-	60	-	°C/W	-
Maximum Junction Temperature	TJ(MAX)	-	-	150	°C	-
Input Voltage Range	VIN	0	-	5.5	V	-
Input Leakage Current	IIL	-	1	-	μA	VIN = 0V, VCC = 5V
Output Leakage Current	IOL	-	1	-	μA	VOUT = 0V, VCC = 5V
Output Voltage Drop (High Level)	VOH	-	0.2	-	V	IO = 1.5A, VCC = 5V
Output Voltage Drop (Low Level)	VOL	-	0.2	-	V	IO = -1.5A, VCC = 5V
Propagation Delay Time	tpd	-	50	-	ns	VCC = 5V, IL = 15mA
Storage Humidity	RH	0	-	95	%	Non-condensing

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.5V to 5.5V.
   • Use a stable power source to avoid voltage fluctuations that can affect performance.

2. Temperature Management:

   • Operate the device within the temperature range of -40°C to 125°C.
   • Store the device in an environment between -65°C and 150°C.
   • Monitor the junction temperature to ensure it does not exceed 150°C.

3. Current Handling:

   • The maximum continuous output current per channel is 1.5A.
   • For peak currents up to 3A, ensure the pulse width is ≤ 1ms and the duty cycle is ≤ 2%.

4. Thermal Considerations:

   • The thermal resistance (R_θJA) is 60°C/W. Use appropriate heat sinks or cooling methods to manage heat dissipation.

5. Input and Output Signals:

   • The input voltage range should be between 0V and 5.5V.
   • Ensure input leakage current is kept below 1μA to maintain reliable operation.
   • The output leakage current should also be kept below 1μA.

6. Output Voltage Drop:

   • At high levels, the output voltage drop (V_OH) should not exceed 0.2V when the output current is 1.5A.
   • At low levels, the output voltage drop (V_OL) should not exceed 0.2V when the output current is -1.5A.

7. Propagation Delay:

   • The propagation delay time (t_pd) is typically 50ns at a supply voltage of 5V and a load current of 15mA.

8. Environmental Conditions:

   • Store the device in a non-condensing environment with humidity levels between 0% and 95%.

9. Handling and Installation:

   • Handle the device with care to avoid static discharge.
   • Follow proper soldering techniques to ensure reliable connections and prevent damage to the device.

(For reference only)