Details

---

BUY LTC5507ES6#TRMPBF https://www.utsource.net/itm/p/12610590.html

Parameter	Min	Typ	Max	Unit	Description
Supply Voltage (VDD)	2.7	-	5.5	V	Operating supply voltage range
Supply Current (IDD)	-	4.5	-	mA	Typical supply current at 3.3V
Input Power (PIN)	-20	-	10	dBm	Input power range
Output Power (POUT)	-	10	-	dBm	Typical output power at 0dBm input
Gain	20	-	30	dB	Gain over frequency range
Noise Figure (NF)	2.5	-	4.0	dB	Typical noise figure at 2.14GHz
IIP3 (Input Intercept Point)	-	28	-	dBm	Third-order input intercept point at 2.14GHz
OIP3 (Output Intercept Point)	-	38	-	dBm	Third-order output intercept point at 2.14GHz
Operating Temperature Range	-40	-	85	掳C	Temperature range for operation
Package Type	-	-	-	-	6-lead SOT-23 package
Pin Configuration	-	-	-	-	See pin diagram below

Pin Configuration

Pin Number	Pin Name	Description
1	IN+	Non-inverting input
2	IN-	Inverting input
3	VDD	Supply voltage
4	GND	Ground
5	OUT	Output
6	NC	No connect

Instructions

1. Power Supply: Connect the VDD pin to a stable supply voltage between 2.7V and 5.5V. Ensure the supply is well-decoupled with a 0.1渭F capacitor placed close to the VDD and GND pins.
2. Input Signal: Apply the differential input signal to the IN+ and IN- pins. The input signal should be within the range of -20dBm to 10dBm.
3. Output Signal: The output signal will be available at the OUT pin. The typical output power is 10dBm when the input power is 0dBm.
4. Grounding: Ensure a solid ground connection by connecting the GND pin to the system ground.
5. No Connect Pin: The NC pin should not be connected to any other part of the circuit.
6. Temperature Considerations: The device is designed to operate within a temperature range of -40掳C to 85掳C. Ensure that the operating environment does not exceed these limits.
7. Handling Precautions: Handle the device with care to avoid damage from electrostatic discharge (ESD). Use proper ESD protection equipment and procedures.

Additional Notes

• The LTC5507ES6#TRMPBF is a high-performance RF amplifier designed for applications requiring low noise and high linearity.
• For detailed application notes and further information, refer to the datasheet provided by Linear Technology (now part of Analog Devices).

(For reference only)