Details

---

BUY 2SC3358 https://www.utsource.net/itm/p/12610596.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	40	V
Collector-Base Voltage	VCBO	-	-	60	V
Emitter-Base Voltage	VEBO	-1	-	5	V
Collector Current	IC	-	-	1.5	A
Base Current	IB	-	-	0.15	A
DC Current Gain	hFE	20	100	400	-
Transition Frequency	fT	-	250	-	MHz
Power Dissipation	PD	-	-	625	mW
Operating Temperature	Toper	-55	-	150	掳C
Storage Temperature	Tstg	-65	-	200	掳C

Instructions for Use:

1. Handling Precautions:

   • Avoid exceeding the maximum ratings to prevent damage.
   • Use appropriate heat sinks if operating near maximum power dissipation.

2. Mounting:

   • Ensure proper alignment of the transistor leads with the PCB.
   • Apply a small amount of thermal paste between the transistor and heat sink for better heat dissipation.

3. Biasing:

   • Use a suitable base resistor to limit the base current and avoid saturation.
   • Ensure the base-emitter voltage (VBE) is within the specified range to maintain reliable operation.

4. Testing:

   • Test the transistor in a controlled environment to verify its parameters.
   • Use a multimeter or transistor tester to check for correct operation.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

6. Soldering:

   • Use a soldering iron with a temperature not exceeding 300掳C.
   • Complete soldering within 5 seconds to avoid thermal damage.

7. Applications:

   • Suitable for audio amplifiers, switching circuits, and general-purpose amplification.
   • Ideal for low to medium power applications due to its power dissipation capabilities.

(For reference only)