Details

---

BUY NCP114AMX330TBG https://www.utsource.net/itm/p/12610601.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	1.8	-	3.3	V	Fixed output voltage
Quiescent Current	IQ	-	0.9	-	渭A	Quiescent current at no load
Dropout Voltage	VDROPOUT	-	250	-	mV	Typical dropout voltage at full load
Load Regulation	未VOLoad	-	1	-	%	Change in output voltage with varying load
Line Regulation	未VOLine	-	0.5	-	%	Change in output voltage with varying input
Power Supply Rejection Ratio	PSRR	60	-	80	dB @ 1kHz	Attenuation of ripple from input to output

Instructions for NCP114AMX330TBG:

1. Input Capacitor Selection: Choose a low ESR capacitor (ceramic recommended) close to the input pins to ensure stability and reduce noise.
2. Output Capacitor Selection: Use a ceramic capacitor with low ESR for optimal performance. Ensure it has sufficient capacitance to maintain stability under all operating conditions.
3. Thermal Considerations: Ensure adequate heat dissipation, especially at higher loads, to keep the device within its operational temperature range.
4. Layout Recommendations: Keep traces short and wide between the input capacitor, output capacitor, and the regulator to minimize parasitic inductance and resistance.
5. Bypass Capacitors: Place bypass capacitors as close as possible to the power supply pins to filter out high-frequency noise.
6. Operating Temperature Range: The device is designed to operate within -40掳C to +85掳C. Ensure the ambient temperature does not exceed these limits.
7. Storage Conditions: Store in a dry environment away from direct sunlight and extreme temperatures.

For detailed specifications and more advanced applications, refer to the datasheet provided by the manufacturer.

(For reference only)