Details

---

BUY TLC7524CNG4 https://www.utsource.net/itm/p/12610603.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage range
Output Voltage Swing	VOS	-	0.1	0.3	V	Output offset voltage
Input Bias Current	IB	-	0.5	1.5	渭A	Input bias current
Input Offset Current	IOS	-	0.05	0.15	渭A	Input offset current
Common-Mode Rejection Ratio	CMRR	80	-	95	dB	Common-mode rejection ratio
Power Supply Rejection Ratio	PSRR	80	-	95	dB	Power supply rejection ratio
Bandwidth	BW	-	10	-	MHz	Unity gain bandwidth
Slew Rate	SR	-	0.6	-	V/渭s	Slew rate
Output Current (Source)	IOSC	-	10	25	mA	Output current sourcing capability
Output Current (Sink)	IOSK	-	10	25	mA	Output current sinking capability

Instructions for Use:

1. Power Supply Connection: Connect the power supply to VDD and GND ensuring the voltage is within the specified range of 2.7V to 5.5V.
2. Input Connections: Ensure input signals are within the common mode voltage range to avoid damage or incorrect operation.
3. Output Load: The device can source and sink up to 25mA, ensure load requirements do not exceed this limit.
4. Operating Temperature: Check the datasheet for the operating temperature range to ensure reliable operation.
5. Decoupling Capacitors: Place decoupling capacitors close to the power supply pins to reduce noise and improve stability.
6. Signal Integrity: For high-frequency applications, pay attention to PCB layout to minimize parasitic inductances and capacitances.
7. Refer to Datasheet: Always refer to the full datasheet for detailed specifications and application notes.

(For reference only)