Details

---

BUY 16TTS16 https://www.utsource.net/itm/p/12610623.html

Parameter	Description	Value
Part Number	Component Identifier	16TTS16
Type	Device Type	MOSFET
Package	Housing	TO-220
VDS (Max)	Drain-Source Voltage (Maximum)	16V
VGS (Max)	Gate-Source Voltage (Maximum)	卤20V
ID (Max)	Continuous Drain Current (Maximum)	16A
RDS(on)	On-State Resistance at VGS = 10V	4.5m惟
Power Dissipation (Max)	Maximum Power Dissipation at Tc = 25掳C	100W
Operating Temperature Range	Junction Temperature Range	-55掳C to +175掳C
Storage Temperature Range	Storage Temperature Range	-65掳C to +150掳C
Gate Charge	Total Gate Charge at VGS = 10V	95nC
Input Capacitance	Input Capacitance at VDS = 10V, f = 1MHz	1300pF
Output Capacitance	Output Capacitance at VDS = 10V, f = 1MHz	350pF
Reverse Transfer Capacitance	Reverse Transfer Capacitance at VDS = 10V, f = 1MHz	80pF
Thermal Resistance (Junction to Case)	Thermal Resistance (R胃JC)	1.5掳C/W
Thermal Resistance (Junction to Ambient)	Thermal Resistance (R胃JA)	62.5掳C/W

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool environment within the specified storage temperature range.
   • Handle with care to avoid damage to the leads and body.

2. Mounting:

   • Ensure proper heat sinking to maintain junction temperature within the operating range.
   • Use a thermal compound between the device and the heat sink for better thermal performance.

3. Electrical Connections:

   • Connect the drain, source, and gate terminals correctly to avoid short circuits.
   • Use appropriate wire gauge to handle the maximum current ratings.

4. Biasing:

   • Apply the gate-source voltage (VGS) within the specified limits to prevent damage.
   • Ensure the gate drive circuit is capable of providing the necessary current to charge and discharge the gate capacitance quickly.

5. Protection:

   • Use overvoltage and overcurrent protection circuits to safeguard the device.
   • Consider adding a snubber circuit to suppress voltage transients.

6. Testing:

   • Test the device under controlled conditions to verify its performance.
   • Monitor the temperature and current during operation to ensure it remains within safe limits.

7. Compliance:

   • Ensure the device complies with all relevant safety and regulatory standards for your application.

(For reference only)