Details

---

BUY BTA12-400C https://www.utsource.net/itm/p/12610630.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
RMS On-State Current	IT(RMS)	-	12	-	A	Tj = 25掳C
Peak On-State Current	ITSM	-	60	-	A	Tj = 25掳C, t = 10 ms, Duty < 1%
Repetitive Peak Off-State Voltage	VDRM	400	-	-	V	I = 0, Tj = 25掳C
Non-Repetitive Peak Off-State Voltage	VRRM	440	-	-	V	I = 0, Tj = 25掳C
On-State Voltage	VT	-	1.4	-	V	IT(RMS) = 12 A, Tj = 25掳C
Gate Trigger Current	IG(T)	35	-	70	mA	Tj = 25掳C
Holding Current	IH	-	10	-	mA	Tj = 25掳C
Thermal Resistance, Junction to Case	R胃JC	-	1.0	-	掳C/W	-
Operating Temperature Range	Tj	-40	-	125	掳C	-
Storage Temperature Range	Tstg	-40	-	125	掳C	-

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain junction temperature within specified limits.
   • Use thermal compound between the device and heat sink for better thermal conductivity.

2. Gate Drive:

   • Apply a gate trigger current (IG(T)) of at least 35 mA to ensure reliable turn-on.
   • The gate should be driven with a pulse width sufficient to fully turn on the device.

3. Current Handling:

   • Do not exceed the RMS on-state current (IT(RMS)) of 12 A to avoid overheating.
   • For short-term peak currents, ensure they do not exceed 60 A and are limited to 10 ms with a duty cycle less than 1%.

4. Voltage Handling:

   • The device can handle a repetitive peak off-state voltage (VDRM) of 400 V and a non-repetitive peak off-state voltage (VRRM) of 440 V.
   • Ensure that the applied voltage does not exceed these ratings to prevent breakdown.

5. Thermal Management:

   • Monitor the junction temperature (Tj) to ensure it remains within the operating range of -40掳C to 125掳C.
   • Proper cooling is essential to maintain performance and longevity.

6. Storage:

   • Store the device in a dry environment within the storage temperature range of -40掳C to 125掳C.

7. Handling:

   • Handle the device with care to avoid mechanical damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage to the sensitive components.

8. Testing:

   • Perform initial testing under controlled conditions to verify correct operation.
   • Regularly check the device parameters to ensure they remain within specified limits.

By following these guidelines, you can ensure optimal performance and reliability of the BTA12-400C triac.

(For reference only)