Details

---

BUY MPSU10 https://www.utsource.net/itm/p/12610634.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	3.3	-	V	Fixed output voltage
Output Current	IOUT	-	1.0	-	A	Maximum continuous output current
Quiescent Current	IQ	-	2.0	-	渭A	Quiescent current at no load
Dropout Voltage	VDROPOUT	-	0.3	-	V	Dropout voltage at 1.0A
Efficiency	畏	-	90	-	%	Typical efficiency at 1.0A
Operating Temp.	Toper	-40	-	85	掳C	Operating temperature range
Storage Temp.	Tstg	-65	-	150	掳C	Storage temperature range

Instructions for Use:

1. Input Connection:

   • Connect the input voltage (VIN) to the input pin of the MPSU10.
   • Ensure the input voltage is within the specified range (2.7V to 5.5V).

2. Output Connection:

   • Connect the output pin (VOUT) to the load or circuit requiring the regulated 3.3V supply.
   • The maximum continuous output current is 1.0A.

3. Ground Connection:

   • Ensure a solid ground connection between the input, output, and load circuits to maintain stable operation.

4. Capacitor Requirements:

   • Place a 1渭F ceramic capacitor close to the input pin (VIN) to filter out noise and stabilize the input voltage.
   • Place a 1渭F ceramic capacitor close to the output pin (VOUT) to ensure stable output regulation.

5. Thermal Management:

   • The device is designed to operate efficiently, but ensure adequate heat dissipation if operating at high currents or in high ambient temperatures.
   • Use a heatsink if necessary, especially when operating near the maximum output current.

6. Operating Temperature:

   • The device can operate within a temperature range of -40掳C to 85掳C. Store the device between -65掳C and 150掳C.

7. Efficiency Considerations:

   • The typical efficiency is 90% at 1.0A. Monitor the power consumption and heat dissipation to optimize performance.

8. Dropout Voltage:

   • The dropout voltage is typically 0.3V at 1.0A. Ensure the input voltage is at least 0.3V higher than the output voltage to maintain regulation.

9. Quiescent Current:

   • The quiescent current is 2.0渭A at no load, which helps in minimizing power loss in low-power applications.

10. Handling Precautions:

    • Handle the device with care to avoid static damage. Use proper ESD protection measures.
    • Avoid exposing the device to excessive mechanical stress or moisture.

By following these instructions, you can ensure optimal performance and reliability of the MPSU10 in your application.

(For reference only)