Details

---

BUY BTB16-600 https://www.utsource.net/itm/p/12610646.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Repetitive Peak Off-State Voltage	VDRM/VRRM	Tj = 25°C	600	-	-	V
RMS On-State Current	IT(RMS)	Tj ≤ 100°C, VGT=12V	-	16	-	A
Non-Repetitive Peak On-State Current	ICM	Tj ≤ 40°C, t=10ms	-	75	-	A
Gate Trigger Voltage	VGT	IF = 1A	1.5	-	3	V
Gate Trigger Current	IGT	VGT = 12V	20	-	100	mA
Turn-On Time	ton	See Note 1	0.5	1.2	2	μs
Turn-Off Time	toff	See Note 1	1.5	2.5	3.5	μs
Dissipation Power (each device)	PD	TC = 40°C	-	-	100	W
Junction Temperature	Tj	Operating Range	-55	-	125	°C

Instructions for Use:

1. Voltage Rating: Ensure that the peak off-state voltage (VDRM/VRRM) does not exceed 600V to prevent damage.
2. Current Handling: The BTB16-600 can handle a continuous RMS on-state current of up to 16A at a junction temperature not exceeding 100°C.
3. Pulse Current: For non-repetitive peak on-state currents, ensure the junction temperature is below 40°C and limit pulse duration to 10ms.
4. Gate Triggering: Apply a gate trigger voltage between 1.5V and 3V with a gate trigger current ranging from 20mA to 100mA.
5. Switching Times: The turn-on time should be within 0.5μs to 2μs, and the turn-off time within 1.5μs to 3.5μs under specified conditions.
6. Power Dissipation: Each device can dissipate up to 100W when the case temperature is maintained at 40°C.
7. Temperature Limits: Operate within a junction temperature range of -55°C to 125°C.

Note 1: Refer to the datasheet for detailed test conditions for turn-on and turn-off times.

(For reference only)