Details

---

BUY NJM2171AR https://www.utsource.net/itm/p/12610647.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		2.7		5.5	V
Output Voltage Swing	Vout	RL = 10k惟, VCC = 3.3V		0.9		V
Quiescent Current	IQ	VCC = 3.3V		4		mA
Slew Rate	SR			0.8		V/渭s
Input Offset Voltage	VOS	VCC = 3.3V	-2		2	mV
Input Bias Current	IB	VCC = 3.3V		5		nA
Common Mode Rejection Ratio	CMRR	f = 1kHz		80		dB
Power Supply Rejection Ratio	PSRR	f = 1kHz		80		dB
Bandwidth (Small Signal)	GBW	VCC = 3.3V		1.5		MHz
Large Signal Voltage Gain	AV	RL = 2k惟		160		dB

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the specified range of 2.7V to 5.5V.
2. Output Configuration: Connect appropriate load resistance to achieve desired output voltage swing.
3. Power Consumption: Monitor quiescent current especially in low-power applications.
4. Signal Integrity: Be mindful of slew rate limitations when designing signal paths.
5. Offset Management: Account for input offset voltage in precision applications.
6. Biasing: Keep input bias current considerations in mind for high-impedance sources.
7. Noise Reduction: Utilize common mode and power supply rejection ratios to minimize noise.
8. Frequency Response: Design circuits considering the bandwidth and gain characteristics.
9. Stability: Ensure stability by proper compensation if operating near unity gain or using capacitive loads.

For detailed application notes and further specifications, refer to the official datasheet provided by the manufacturer.

(For reference only)