Details

---

BUY M48T08 https://www.utsource.net/itm/p/12610660.html

Parameter	Description	Specifications
Operating Voltage	Supply voltage range	2.0V to 5.5V
Operating Temperature	Temperature range for operation	-40掳C to +85掳C
Storage Capacity	Total memory size	1024 bits (1Kb)
Organization	Memory organization	128 x 8
Data Retention	Duration data is retained without power	10 years at max temperature
Write Cycle	Number of write cycles supported	1,000,000 cycles
Standby Current	Current consumption in standby mode	1 渭A (max)
Active Current	Current consumption during active operations	1 mA (max)
Package Type	Types of packages available	SOIC-8, TSSOP-8
Interface	Communication interface type	SPI

Instructions:

1. Power Supply: Connect the VCC pin to a power supply within the operating voltage range (2.0V to 5.5V). Ground the GND pin.
2. Initialization: Ensure that the device is properly initialized according to the datasheet before performing any read/write operations.
3. Reading Data: Use the appropriate SPI commands to read data from the specified address. The command typically involves sending a read instruction followed by the address.
4. Writing Data: Before writing data, ensure the device is not write-protected. Send the write enable command, followed by the write instruction and data.
5. Data Integrity: To maintain data integrity, avoid exceeding the maximum number of write cycles and ensure the operating temperature does not exceed the specified limits.
6. Handling: Handle the component with care to prevent electrostatic discharge (ESD), which can damage the device.
7. Storage: Store the device in an environment that does not exceed the storage temperature range to prevent degradation of data retention properties.

(For reference only)