Details

---

BUY AD7689BCPZRL7 https://www.utsource.net/itm/p/12610668.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7	-	5.25	V
Analog Input Range	VIN	Single-ended	0	-	VREF	V
Conversion Time	tconv	Full-scale, 1MSPS	-	1.4	-	渭s
Power Consumption	IDD	All channels active	-	3.6	-	mA
Differential Nonlinearity	DNL		-1	-	+1	LSB
Integral Nonlinearity	INL		-3	-	+3	LSB
Signal-to-Noise Ratio	SNR	1kHz input	-	91	-	dB
Total Harmonic Distortion	THD	1kHz input	-	-98	-	dB

Instructions for Using AD7689BCPZRL7

1. Power Supply Connection:

   • Connect the supply voltage (VDD) between 2.7V and 5.25V to ensure proper operation.

2. Analog Input Configuration:

   • Configure the analog input range from 0V to VREF. Ensure that the input signal does not exceed these limits to prevent damage or inaccurate readings.

3. Conversion Process:

   • For a full-scale conversion at a rate of up to 1 million samples per second (MSPS), the conversion time is approximately 1.4 microseconds.

4. Power Management:

   • When all channels are active, the device consumes around 3.6mA. Optimize power usage based on the number of active channels.

5. Linearity Considerations:

   • The device maintains differential nonlinearity (DNL) within 卤1 LSB and integral nonlinearity (INL) within 卤3 LSB, ensuring accurate conversions.

6. Performance Metrics:

   • For an input frequency of 1kHz, expect a signal-to-noise ratio (SNR) of 91dB and a total harmonic distortion (THD) of -98dB, indicating high performance in terms of noise and distortion.

7. Interface Setup:

   • Use the appropriate SPI or parallel interface settings as specified in the datasheet to communicate with the AD7689BCPZRL7.

Ensure you consult the full datasheet for detailed specifications and application notes specific to your use case.

(For reference only)