Details

---

BUY D1NC60 https://www.utsource.net/itm/p/12610680.html

Parameter	Symbol	Min	Typ	Max	Unit
Reverse Voltage	VR	-	600	-	V
Average Rectified Forward Current (Tc = 100掳C)	IF(AV)	-	1	-	A
Peak Non-repetitive Surge Current (Tj = 25掳C, tp = 8.3 ms)	IFSM	-	30	-	A
Forward Voltage at IF = 1A	VF	-	1.1	-	V
Junction Capacitance (VR = 400V, f = 1 MHz)	CJ	-	17	-	pF
Reverse Recovery Time (IF = 1A, IR = 0.5A, dIT/dt = 200A/渭s)	trr	-	50	-	ns
Operating and Storage Temperature Range	Tj, Tstg	-55	-	150	掳C

Instructions for Use:

1. Mounting:

   • Ensure that the diode is mounted with adequate thermal management to maintain the junction temperature within the specified range.
   • Use appropriate heatsinks or cooling methods if operating at high current levels.

2. Soldering:

   • Solder the diode at a temperature not exceeding 260掳C for no more than 10 seconds.
   • Allow the diode to cool naturally after soldering to prevent thermal shock.

3. Electrical Connections:

   • Connect the diode with the correct polarity. The cathode (K) should be connected to the positive side of the circuit, and the anode (A) to the negative side.
   • Ensure that the reverse voltage does not exceed 600V to avoid breakdown.

4. Surge Current Handling:

   • The diode can handle peak non-repetitive surge currents up to 30A. Ensure that any surge conditions are within this limit to prevent damage.

5. Thermal Management:

   • Monitor the junction temperature to ensure it remains below 150掳C. Exceeding this temperature can lead to premature failure.

6. Storage:

   • Store the diode in a dry, cool place within the temperature range of -55掳C to 150掳C.

7. Handling:

   • Handle the diode with care to avoid mechanical stress, which can affect its performance and reliability.
   • Use static-protective packaging and practices to prevent electrostatic discharge (ESD) damage.

(For reference only)