Details

---

BUY 40464 https://www.utsource.net/itm/p/12610706.html

Parameter	Description	Value
Part Number	Component Identifier	40464
Type	Component Type	IC (Integrated Circuit)
Function	Primary Function	Phase-Locked Loop (PLL)
Package	Physical Package	DIP-16, SOIC-16
Supply Voltage (Vcc)	Operating Voltage Range	4.75 V to 5.25 V
Operating Temperature	Temperature Range	-40掳C to +85掳C
Input Frequency Range	Frequency Range for Input Signals	1 Hz to 5 MHz
Output Frequency Range	Frequency Range for Output Signals	1 Hz to 5 MHz
Phase Detector Types	Available Phase Detectors	Exor, Edge-Triggered, Dual-Dual
VCO (Voltage-Controlled Oscillator)	Internal VCO	Yes
VCO Frequency Range	VCO Frequency Range	1 Hz to 5 MHz
Power Consumption	Typical Power Consumption	20 mW (at 5 V)
Propagation Delay	Typical Propagation Delay	30 ns
Quiescent Current	Current Consumption in Standby	10 渭A
Storage Temperature	Temperature Range for Storage	-65掳C to +150掳C
Mounting Type	Mounting Method	Surface Mount, Through-Hole

Instructions for Use:

1. Power Supply:

   • Connect the supply voltage (Vcc) to pin 16 and ground (GND) to pin 8.
   • Ensure the supply voltage is within the specified range (4.75 V to 5.25 V).

2. Phase Detectors:

   • The 40464 IC includes three types of phase detectors: Exor, Edge-Triggered, and Dual-Dual.
   • Select the appropriate phase detector by connecting the input signals to the corresponding pins.

3. VCO Configuration:

   • The internal VCO can be configured using external components such as capacitors and resistors.
   • Connect the external capacitor between pins 6 and 7, and the external resistor between pins 7 and 8 to set the VCO frequency.

4. Output Selection:

   • The output of the VCO is available at pin 4.
   • Use the output signal for further processing or to drive other circuits.

5. Temperature Considerations:

   • Ensure the operating temperature remains within the specified range (-40掳C to +85掳C) to avoid damage or performance degradation.

6. Storage:

   • Store the IC in a dry, cool environment with temperatures ranging from -65掳C to +150掳C.

7. Handling:

   • Handle the IC with care to avoid static discharge, which can damage the sensitive components.
   • Use proper anti-static precautions when handling and soldering the IC.

8. Testing:

   • Before integrating the IC into a circuit, test it individually to ensure it meets the required specifications.

9. Mounting:

   • For surface mount packages, follow standard reflow soldering procedures.
   • For through-hole packages, use a suitable soldering iron and ensure proper alignment and soldering of all pins.

(For reference only)