Details

---

BUY 2N2907A https://www.utsource.net/itm/p/12610728.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	VCEO	-	-	60	V	IC = 150 mA, IB = 0
Collector-Base Voltage	VCBO	-	-	70	V	IC = 0, IE = 0
Emitter-Base Voltage	VEBO	-	-	6	V	IC = 0, IE = 0
Collector Current	IC	-	-	150	mA	VCE = 30V, IB = 0
Base Current	IB	-	-	20	mA	VCE = 30V
DC Current Gain	hFE	50	150	300	-	IC = 10 mA, VCE = 1V
Transition Frequency	fT	-	300	-	MHz	IC = 10 mA
Storage Temperature Range	TSTG	-65	-	150	掳C	-
Operating Temperature Range	TOP	-65	-	150	掳C	-

Instructions for Use:

1. Mounting:

   • Ensure the 2N2907A is mounted on a suitable heat sink if it will be operating at high power levels.
   • Use appropriate insulation to avoid short circuits.

2. Biasing:

   • The base-emitter junction should be forward-biased to turn the transistor on.
   • The collector-emitter voltage (V_CE) should not exceed the maximum rating of 60V to prevent damage.

3. Current Limiting:

   • Use a base resistor to limit the base current (IB) and prevent excessive collector current (IC).
   • The maximum collector current (IC) should not exceed 150 mA to ensure reliable operation.

4. Temperature Considerations:

   • The operating temperature range is from -65掳C to 150掳C. Ensure the ambient temperature does not exceed these limits.
   • For extended life and reliability, avoid operating the transistor at its maximum temperature ratings for prolonged periods.

5. Storage:

   • Store the 2N2907A in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid mechanical stress or damage to the leads.

6. Testing:

   • Before installing the transistor, test it using a multimeter or transistor tester to ensure it is functioning correctly.
   • Check for continuity between the base and emitter, and between the collector and emitter, to verify that the transistor is not damaged.

7. Soldering:

   • Use a low-wattage soldering iron to avoid overheating the transistor.
   • Ensure the leads are clean and free of oxide before soldering to achieve a good connection.

By following these guidelines, you can ensure the 2N2907A operates reliably and efficiently in your circuit.

(For reference only)