Details

---

BUY G2RL-14-E-CF-12VDC https://www.utsource.net/itm/p/12610732.html

Parameter	Value
Type	Relay, General Purpose
Model	G2RL-14-E-CF-12VDC
Coil Voltage	12VDC
Coil Power Consumption	0.6W (50mA)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A, 250VAC / 30VDC
Insulation Resistance	100M惟 or more (500VDC)
Dielectric Strength	2500VAC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Humidity	95% RH at +40掳C
Life Expectancy	100,000 operations
Weight	20g
Dimensions	17.5mm (W) x 12.5mm (D) x 26.5mm (H)
Terminal Type	Solder Lug

Instructions

1. Installation:

   • Ensure that the relay is installed in a well-ventilated area to prevent overheating.
   • Use appropriate soldering techniques to connect the relay terminals. Avoid excessive heat to prevent damage.

2. Power Supply:

   • Connect the coil terminals to a 12VDC power supply.
   • Ensure the power supply can provide at least 50mA of current to operate the relay.

3. Load Connection:

   • Connect the load to the normally open (NO) and common (COM) contacts for operation when the relay is energized.
   • Connect the load to the normally closed (NC) and common (COM) contacts for operation when the relay is de-energized.

4. Testing:

   • Apply 12VDC to the coil terminals to energize the relay.
   • Verify that the contacts switch as expected by measuring continuity between the NO/COM or NC/COM terminals.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a dry cloth if necessary. Avoid using solvents that could damage the relay.

6. Safety:

   • Do not exceed the rated voltage and current for the contacts.
   • Ensure proper grounding to prevent electrical hazards.
   • Follow all local electrical codes and regulations.

(For reference only)