Details

---

BUY SP3025-04HTG https://www.utsource.net/itm/p/12610736.html

Parameter	Description	Value	Unit
Part Number	Component Identifier	SP3025-04HTG	-
Type	Device Type	SPDT Relay	-
Coil Voltage	Voltage required to energize the relay coil	5	V
Coil Current	Maximum current that flows through the coil when energized	10	mA
Contact Form	Configuration of switch contacts	SPDT	-
Contact Rating	Maximum current and voltage the contacts can handle	1A, 30VDC/125VAC	A,V
Insulation Resistance	Electrical resistance between isolated circuits	100	M惟
Operating Temperature	Temperature range in which the device can operate effectively	-40 to +85	掳C
Package Type	Physical dimensions and pin configuration	DIP-8	-

Instructions for SP3025-04HTG:

1. Installation:

   • Ensure the operating environment is within the specified temperature range.
   • Carefully insert the component into the designated socket or PCB ensuring correct orientation.

2. Powering:

   • Apply the specified coil voltage (5V) to activate the relay.
   • Ensure the power supply is stable and within tolerance to prevent damage.

3. Handling Contacts:

   • Do not exceed the contact rating to avoid premature wear or failure.
   • Regularly inspect contacts for signs of corrosion or damage.

4. Testing:

   • Verify operation by applying the rated voltage across the coil and checking the continuity of the contacts.
   • Use a multimeter to ensure proper switching action.

5. Maintenance:

   • Keep the relay free from dust and debris to ensure reliable operation.
   • Periodically check the insulation resistance to confirm electrical isolation integrity.

(For reference only)