Details

---

BUY 2SB1328 https://www.utsource.net/itm/p/12610742.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCE	-	50	-	V
Base-Emitter Voltage	VBE	-	6.5	-	V
Collector Current	IC	-	200	-	mA
Base Current	IB	-	20	-	mA
Power Dissipation	PT	-	625	-	mW
Operating Temperature	TOP	-55	-	150	掳C
Storage Temperature	TS	-65	-	150	掳C
Transition Frequency	fT	-	200	-	MHz

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SB1328 with care to avoid mechanical stress.
   • Ensure proper heat dissipation by mounting on a suitable heatsink if operating at high currents or temperatures.

2. Electrical Connections:

   • Connect the collector (C) to the positive supply voltage.
   • Connect the emitter (E) to ground.
   • Apply the base (B) current to control the transistor.

3. Biasing:

   • Use a resistor to limit the base current to prevent damage to the transistor.
   • Ensure the base-emitter voltage (V_BE) does not exceed the maximum rating.

4. Operating Conditions:

   • Do not exceed the maximum collector-emitter voltage (V_CE).
   • Keep the power dissipation (P_T) within the specified limits to avoid overheating.
   • Operate within the recommended temperature range to ensure reliable performance.

5. Storage:

   • Store the 2SB1328 in a dry, cool place away from direct sunlight and sources of heat.
   • Avoid exposure to corrosive environments.

6. Testing:

   • Use a multimeter to check the continuity and resistance between the pins before installation.
   • Perform a simple test circuit to verify the functionality of the transistor.

7. Safety:

   • Always follow standard safety procedures when working with electrical components.
   • Disconnect power before making any connections or modifications.

(For reference only)