Details

---

BUY TA7630P https://www.utsource.net/itm/p/12610753.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	4.5	-	18	V
Quiescent Current	Iq	-	2.5	-	mA
Output Current (Max)	Iout	-	250	-	mA
Output Voltage (Min)	Vout	0.2	-	-	V
Output Voltage (Max)	Vout	-	Vcc-0.2	-	V
Thermal Shutdown	TSD	-	150	-	掳C
Operating Temperature	Topr	-40	-	85	掳C
Storage Temperature	Tstg	-55	-	150	掳C

Instructions for Using TA7630P

1. Supply Voltage:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 18V. Operating outside this range can damage the device.

2. Quiescent Current:

   • The quiescent current is typically 2.5mA. This is the current consumed by the device when it is not driving any load.

3. Output Current:

   • The maximum output current (Iout) is 250mA. Do not exceed this limit to avoid overheating and potential damage.

4. Output Voltage:

   • The minimum output voltage (Vout) is 0.2V above ground.
   • The maximum output voltage (Vout) is 0.2V below the supply voltage (Vcc).

5. Thermal Shutdown:

   • The device will automatically shut down if the temperature exceeds 150掳C to prevent damage. Allow the device to cool before resuming operation.

6. Operating Temperature:

   • The operating temperature range is from -40掳C to 85掳C. Operating outside this range may affect performance and reliability.

7. Storage Temperature:

   • Store the device in an environment with a temperature range of -55掳C to 150掳C to ensure long-term stability.

8. Mounting and Handling:

   • Use appropriate handling techniques to avoid static discharge and physical damage.
   • Ensure proper mounting on the PCB to maintain good thermal dissipation.

9. Circuit Design:

   • Include necessary decoupling capacitors close to the power pins to stabilize the supply voltage and reduce noise.
   • Use appropriate external components as specified in the datasheet for optimal performance.

10. Testing and Troubleshooting:

    • Test the circuit under normal operating conditions to verify correct functionality.
    • If issues arise, check for proper connections, correct supply voltage, and thermal management.

For detailed specifications and application notes, refer to the official datasheet provided by the manufacturer.

(For reference only)