Details

---

BUY TPS3828-33DBVRG4 https://www.utsource.net/itm/p/12610756.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.6	-	5.5	V
Input Voltage	VIN	Overvoltage threshold	-	3.3	-	V
Response Time	tr	Rising edge	-	200	-	渭s
Output Type			-	Open-Drain	-
Leakage Current	ILK	VOUT = 0V, TJ = 25掳C	-	1	-	渭A
Operating Temperature	Toper		-40	-	125	掳C
Storage Temperature	Tstg		-65	-	150	掳C

Instructions for TPS3828-33DBVRG4

1. Power Supply Connection:

   • Connect the supply voltage (VDD) to the appropriate pin. Ensure the supply voltage is within the operating range of 1.6V to 5.5V.

2. Input Voltage Monitoring:

   • The device monitors the input voltage (VIN). It triggers an overvoltage condition when VIN exceeds 3.3V.

3. Response Timing:

   • The response time for detecting a rising edge on the input voltage is typically 200 microseconds. Ensure that any transient conditions are accounted for in system design.

4. Output Configuration:

   • The output is open-drain. Therefore, an external pull-up resistor may be required depending on the application.

5. Leakage Current Consideration:

   • At room temperature (TJ = 25掳C), the leakage current should not exceed 1渭A. This parameter is important for low-power applications.

6. Temperature Range:

   • Ensure the device operates within the specified temperature range (-40掳C to 125掳C) for reliable performance. Storage temperature should also be considered if the device will be stored outside of operational periods.

7. Handling and Installation:

   • Handle with care to avoid damage from electrostatic discharge (ESD). Follow standard practices for surface-mount technology (SMT) components during installation.

8. Compliance and Standards:

   • Verify that the component meets all relevant compliance standards and certifications as per your application requirements.

(For reference only)