Details

---

BUY SFH6720T https://www.utsource.net/itm/p/12610764.html

Parameter	Symbol	Min	Typ	Max	Unit
Forward Current (Continuous)	IF	-	50	-	mA
Peak Forward Current (10 渭s pulse)	IFp	-	300	-	mA
Reverse Voltage	VR	-	5	-	V
Forward Voltage (IF = 20 mA)	VF	1.2	1.4	1.6	V
Reverse Current (VR = 5 V)	IR	-	0.1	1	渭A
Spectral Range	位	850	-	950	nm
Peak Emission Wavelength	位p	-	880	-	nm
Radiant Intensity (IF = 50 mA)	Iv	-	1000	-	mW/sr
Viewing Angle (Half-Intensity)	胃	-	10	-	掳
Operating Temperature Range	Toper	-40	-	85	掳C
Storage Temperature Range	Tstg	-40	-	100	掳C

Instructions for Use:

1. Handling:

   • Handle the SFH6720T with care to avoid mechanical damage.
   • Use appropriate ESD protection to prevent damage from static electricity.

2. Mounting:

   • Ensure proper alignment during mounting to maintain the specified viewing angle.
   • Use recommended soldering profiles to avoid thermal stress.

3. Electrical Connections:

   • Connect the anode to the positive supply and the cathode to the ground.
   • Use current-limiting resistors to ensure the forward current does not exceed 50 mA continuously or 300 mA for pulses.

4. Thermal Management:

   • Ensure adequate heat dissipation, especially when operating at high currents or in high ambient temperatures.
   • Consider using a heatsink if necessary.

5. Optical Considerations:

   • Position the device to optimize the viewing angle and radiant intensity for the application.
   • Use optical filters or lenses if required to achieve the desired performance.

6. Environmental Conditions:

   • Operate within the specified temperature ranges to ensure reliable performance.
   • Store in a dry environment to prevent moisture-related issues.

7. Testing:

   • Perform initial testing at low currents to verify correct operation before applying higher currents.
   • Regularly inspect the device for signs of wear or damage.

8. Compliance:

   • Ensure compliance with relevant safety and regulatory standards for the intended application.

(For reference only)