Details

---

BUY K10N60. https://www.utsource.net/itm/p/12610765.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Forward Voltage	Vf	-	1.8	2.4	V	@ If = 20mA, Ta = 25°C
Reverse Current	Ir	-	100	-	nA	@ Vr = 5V, Ta = 25°C
Peak Forward Current	Ifsm	-	-	30	mA	Pulse Width ≤ 1ms, Duty Cycle ≤ 2%
Continuous Forward Current	If	-	-	20	mA	Ta = 25°C
Reverse Voltage	Vr	-	-	5	V	Maximum
Operating Temperature	Topr	-40	-	85	°C	Storage and Operation
Storage Temperature	Tstg	-40	-	100	°C
Wavelength	λ	620	-	630	nm
Viewing Angle	θ	-	20	-	°

Instructions:

1. Mounting and Handling:

   • Handle the K10N60 with care to avoid mechanical damage.
   • Use appropriate tools and techniques to solder the component, ensuring not to exceed the maximum ratings.

2. Electrical Connections:

   • Connect the anode (longer lead) to the positive supply and the cathode (shorter lead) to the negative or ground.
   • Ensure that the forward current does not exceed 20mA continuously to prevent overheating and potential damage.

3. Thermal Management:

   • The operating temperature range is -40°C to 85°C. Ensure that the ambient temperature is within this range to maintain optimal performance.
   • For applications where the LED will be used at high currents or in high-temperature environments, consider using a heatsink or other cooling methods.

4. Pulse Operation:

   • For pulse operation, the peak forward current can be up to 30mA for pulse widths ≤ 1ms and duty cycles ≤ 2%.

5. Storage:

   • Store the K10N60 in a dry, cool place with temperatures between -40°C and 100°C.

6. Wavelength and Color:

   • The K10N60 emits red light with a wavelength between 620nm and 630nm, providing a consistent color output.

7. Viewing Angle:

   • The viewing angle is approximately 20°, which means the LED is most visible within this angle from the center axis.

8. Testing:

   • Before integrating the K10N60 into your circuit, test it with a simple circuit to ensure it functions correctly. Use a current-limiting resistor to protect the LED during testing.

(For reference only)