Details

---

BUY IPW60R045 https://www.utsource.net/itm/p/12610769.html

Parameter	Symbol	Test Conditions	Min	Typical	Max	Unit
Continuous Drain Current	ID	VGS = 10V, Tc = 25掳C	-	60	-	A
Gate-Source Voltage	VGS	-	-15	0	+15	V
Drain-Source Breakdown Voltage	BVdss	ID = 250渭A, Tc = 25掳C	-	600	-	V
On-State Resistance	RDS(on)	VGS = 10V, ID = 60A, Tc = 25掳C	-	4.5	-	m惟
Gate Charge	Qg	VGS = 10V, ID = 60A	-	130	-	nC
Total Switching Energy	Esw	VDS = 450V, ID = 60A, f = 50kHz	-	9.5	-	渭J

Instructions for IPW60R045:

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid damage to the leads and package.

2. Mounting:

   • Ensure proper heat sinking if operating at high currents or power levels.
   • Follow recommended soldering profiles to prevent thermal damage.

3. Operation:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure adequate gate drive voltage (VGS) to minimize on-state resistance and switching losses.
   • Use appropriate decoupling capacitors near the device to reduce noise and improve stability.

4. Testing:

   • Verify all connections are secure before applying power.
   • Perform initial tests at reduced power levels to ensure correct operation.

5. Safety:

   • Always use protective equipment when handling high-voltage circuits.
   • Ensure the device is properly isolated from live circuits during testing and maintenance.

(For reference only)