Details

---

BUY 6R125C6 https://www.utsource.net/itm/p/12610776.html

Parameter	Value	Unit
Capacitance	6.0	渭F
Rated Voltage	125	VDC
Tolerance	卤10%
Temperature Range	-40 to +85	掳C
Operating Frequency	120	Hz
Case Size	6R
Lead Spacing	7.5	mm
Lead Diameter	1.0	mm
Insulation Resistance	1000 M惟 min	惟
Dissipation Factor	0.15 max (120Hz)

Instructions for Use:

1. Mounting: Ensure that the leads are not bent sharply close to the body of the capacitor. Use a lead bending radius of at least twice the diameter of the lead.
2. Polarity: This is an electrolytic capacitor and must be connected with correct polarity. The positive terminal is marked on the capacitor.
3. Voltage Rating: Do not exceed the rated voltage of 125VDC. Continuous operation above this voltage can cause failure.
4. Temperature: Operate within the temperature range of -40掳C to +85掳C. Exceeding these limits can degrade performance and lifespan.
5. Storage: Store in a dry environment with temperatures between -25掳C and +50掳C.
6. Soldering: Preheat the capacitor to 70掳C to 80掳C before soldering. Soldering time should not exceed 3 seconds per connection, and the temperature should not exceed 260掳C.
7. Inspection: After installation, visually inspect the capacitor for any damage or misalignment. Ensure that the leads are securely soldered.
8. Testing: Before applying full voltage, perform a low-voltage test to ensure the capacitor is functioning correctly. Gradually increase the voltage to the rated value while monitoring for any abnormalities.

(For reference only)