Details

---

BUY MT3516W https://www.utsource.net/itm/p/12610782.html

Parameter	Description
Part Number	MT3516W
Type	Power Management IC
Function	DC-DC Converter
Input Voltage	2.7V to 5.5V
Output Voltage	Adjustable, typically 0.8V to 3.3V
Switching Frequency	1.2MHz (Typical)
Output Current	Up to 1.5A
Efficiency	Up to 95%
Package Type	SOP-8
Operating Temperature	-40掳C to +85掳C
Features	Integrated compensation, soft-start, thermal shutdown, short-circuit protection

Instructions for Use:

1. Circuit Design:

   • Ensure the input voltage is within the specified range of 2.7V to 5.5V.
   • Select external components such as inductors and capacitors based on the desired output voltage and current requirements.

2. PCB Layout Considerations:

   • Place input and output capacitors close to the IC to minimize noise and improve transient response.
   • Keep the loop area small to reduce EMI.

3. Setting Output Voltage:

   • The output voltage can be set using a resistor divider network connected to the FB (feedback) pin.
   • Use the formula: Vout = Vref * (1 + R1/R2), where Vref is typically 0.8V.

4. Thermal Management:

   • Ensure adequate heat dissipation if operating at high output currents or in high ambient temperatures.
   • Consider using a heatsink or thermal pad under the IC.

5. Protection Features:

   • The device includes built-in thermal shutdown and short-circuit protection to safeguard against faults.
   • Verify these features are not compromised by external circuit design.

6. Testing:

   • Before finalizing the design, test the circuit under various load conditions to ensure stability and performance meet the application requirements.

(For reference only)