Details

---

BUY 74LVC16245A. https://www.utsource.net/itm/p/12610784.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	1.65	-	3.6	V
Input Low Voltage	VIL	VI = 0 to VCC	0.0	-	0.8 * VCC	V
Input High Voltage	V<subIH	VI = 0 to VCC	0.2 * VCC	-	VCC	V
Output Low Voltage	VOL	IOL = 16 mA, VCC = 3.6 V	0.0	-	0.4	V
Output High Voltage	VOH	IOH = -4 mA, VCC = 3.6 V	2.4	-	VCC	V
Input Leakage Current	IIL	VI = 0 to VCC	-1	-	1	渭A
Output Leakage Current	IOL	VO = 0 to VCC	-1	-	1	渭A
Propagation Delay Time	t<subpd	VCC = 3.6 V, TA = 25掳C	-	5	-	ns
Power Dissipation	P<subD	Per Package	-	-	340	mW

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the operating range of 1.65 V to 3.6 V.
   • Connect the ground (GND) pin to the system ground.

2. Input Signals:

   • Input signals should be within the specified input voltage levels (V_IL and V_IH).
   • Avoid exceeding the maximum input voltage, which is equal to V_CC.

3. Output Signals:

   • The output low voltage (V_OL) and output high voltage (V_OH) should meet the specified conditions to ensure proper logic levels.
   • Ensure that the output current does not exceed the maximum ratings to avoid damage.

4. Propagation Delay:

   • The propagation delay time (t_pd) is crucial for timing considerations in your circuit. It is typically 5 ns at V_CC = 3.6 V and 25掳C.

5. Power Dissipation:

   • The total power dissipation (P_D) should not exceed 340 mW to prevent overheating and potential damage to the device.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage the sensitive components.
   • Store the device in a dry, cool place to prevent moisture damage.

7. Layout Considerations:

   • Place decoupling capacitors close to the V_CC and GND pins to minimize noise and ensure stable operation.
   • Use short, wide traces for power and ground connections to reduce inductance and resistance.

By following these guidelines, you can ensure reliable and efficient operation of the 74LVC16245A.

(For reference only)